Descrizione

FBT J MAXX 112A PROCESSED 2-WAY ACTIVE LOUDSPEAKER 700W + 200W – 131 DB SPL

Diffusore acustico amplificato.

Caratteristiche:

  • 12” LF woofer with 2” voice coil
  • 1’’ exit throat HF compression driver with 1” voice coil
  • Frequency response from 48Hz to 20 kHz
  • Extremely lightweight: only 13.8Kg
  • 2-way, bi-amplified bass reflex design cabinet
  • 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply
  • DSP with 4-EQ presets
  • Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch
  • 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate
  • 90°H x 60°V constant directivity horn
  • Stage monitor angling facility with 12°, 40° or 55° taper

Specifiche tecniche:

  • 2 way
  • BUILT-IN AMPLIFIER LF/HF: 700/200 W RMS
  • FREQUENCY RESPONSE: 48Hz – 20KHz -6dB
  • LOW FREQUENCY WOOFER: 12 – 2 coil inch
  • HIGH FREQUENCY DRIVER: 1 – 1 coil inch
  • MAXIMUM SPL CONT/PEAK: 125 / 131 dB
  • DISPERSION: 92° x 60° HxV
  • INPUT IMPEDANCE: 22 Kohm
  • INPUT CONNECTOR: XLR with loop, Jack 6.3mm
  • POWER CORD: 5 16,4 m/ft
  • NET DIMENSION (WXHXD): 402x644x345 15,8×25,4×13,6 mm/inch
  • NET WEIGHT: 13.8/30.4 Kg/lb
  • TRANSPORT DIMENSION (WXHXD): 500x745x440 19,7×29,3×17,3 mm/inch
  • TRANSPORT WEIGHT: 16.5/36.4 Kg/lb

 

Per ogni nostra spedizione hai incluso nel prezzo:

  • un setup professionale per le chitarre ed i bassi
  • un controllo di ogni funzione per gli strumenti elettronici
  • un setup iniziale per gli strumenti a fiato
  • un anno di garanzia per ogni strumento musicale usato e due anni sul nuovo